Water Tanks – Plastimo Flexible Fresh Water Tanks – 9.25, 13 , 26, 33, 40, and 52 Gallons – High Resistance.

FLEXIBLE FRESH WATER TANK 9 to 40 GALLONS- PLASTIMO

Specifications:

35 Liters 55 cm x 70 cm – Trapezoid- 9.25 Gal.
50 Liters 070 cm x 70 cm – Square – 13 Gal
100 Liters 105 cm x 70 cm – Rectangular – 26 Gal
150 liters 140 cm x 70 cm – Rectangular – 40 Gal
200 liters 175 cm x 70 cm – Rectangular – 52 gal
120 liters 105 cm x 115 cm x 38 cm – Triangular – 33 Gal ( Item 70957)

Inlet and Outlet are at the center and opposite.
Inlet at the center , Outlet at the corner and opposite.
Inlet at the narrow part of the triangle and outlet at the bottom part same side.

The Plastimo high resistance flexible water tanks are a reliable, practical and low cost solutionto the storage of fresh water on board. They are flexible, light and form-fitting,and can therefore be installed where it would not be possible to install a rigid water tank,due to the shape of the boat or difficult access.

The double envelope principle makes maintenanceeasy, as the inner chamber can be easily removedfrom the outer envelope for routine cleaningand examination

BISPHENOL AFREE
PHTALATE – FREE

FEATURES

The double envelope principle (food-compatible PVC water chamber) makes maintenanceeasy : the inner chamber can be easily removedfrom the outer envelope for routine cleaningand examination.
Water tanks are supplied complete, ready to install, with 38 mm inlet fittingand 12 mm outlet .

• 38 mm inlet fitting is situated on upper side of tank
• 12 mmfitting valve is situated on underneath side of tank(except on triangular model ( 2 version) : inlet and outlet are both onsame side of tank on item 16658, item26957 has on opposite side).
• Height of tanks, when filled to capacity : 25 cm. ~ 10″
• 1″ = 2.54cm

IMPORTANT: When mount the inlet and outlet use PTFE Thread Seal Tape Part number P131212010 to avoid leaks. Only use your hands pressure to tight the fittings.